Husqvarna 1153183-26 - Manual (Page 21)

STARTING AND STOPPING
English – 21
Push in the choke control as soon as the engine fires and
keep pulling until the engine starts. When the engine
starts, quickly apply full throttle; the throttle start lock will
automatically disengage.
As the chain brake is still engaged the speed of the
engine must be set to idling as soon as possible, this is
achieved by quickly disengaging the throttle lock. This
prevents unnecessary wear to the clutch, clutch drum and
brake band.
Reactivate the chain brake by pushing the front hand
guard back towards the front handle. The chain saw is
now ready for use.
Stopping
Stop the engine by switching off the ignition. (Move the
ignition switch to stop position.)