beautypg.com

4 use the operation buttons, Take down the water inlet hose – haier 50FREE-3B User Manual

Page 9

background image

MIN

RINSE button

SPIN button

Push WATER LEVEL/DISINFECT button to select a
suitable water level.

A.

4 Use the operation buttons

Description of the function of the buttons

Mode and meaning of the indicator light

Flashing: indicate the running program

On: indicate the program about to run, or indicate the selected mode

During operation of programs, it displays the
remained time (minute) or remained times of
the corresponding procedure

Digital tube

Push the RINSE button to set
the rinse procedure.
During STANDARD

GENTLE

HEAVY programs,push the RINSE

button to set different rinse times

( 0, 1, 2, 3, 4 times)
During SAVE program,push
the rinse button,the machine have
no reaction

Push the SPIN button to set
the spin procedure.
During STANDARD

GENTLE

HEAVY programs,push the
spin button to set different spin
minutes ( 0

9 minites)

During SAVE program,push
the spin button,the machine have
no reaction

After the machine is started, You shall push the START/
-PAUSE button and then push WATER LEVEL/DISINF
-ECT button make new setting.
During SAVE program,WATER LEVEL/DISINFECT
will not be changed.
During operation of wash and rinse program, you can
push down the water level button to add water. When you
release the button, or it reaches the overflow water level,
the machine will stop adding water .

Push WATER LEVEL/DISINFECT over 2
seconds , DISINFECT tube is light;Push
WATER LEVEL/DISINFECT over 2 seconds again,
DISINFECT tube is off and the DISINFECT function

is canceled.During the washing maching working,

push START/PAUSE button ,you can make
new selected.

7

10

Off

Check the connection between the water inlet

hose and the water tap

1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap, is firm,
so as to prevent dropping from improve Installation
position.

1.Close the water tap.
2. Pull off the water inlet hose from the water tap and washer

Take down the water inlet hose