Saw chain filing and file gauges, Technical data – Husqvarna 576 XP EPA II User Manual
Page 39
English – 39
TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for Husqvarna chain saw models 576XP, 576XPG and 570. These
chain saw models equipped with either of the listed bar and sawchain combinations, fulfills the requirements according
to ANSI B 175.1-2000 (Gasoline Powered Chain Saws - Safety Requirements).
Note: ATM (Armour Tip Medium) is a designation for a hard nose bar with nose radius 1,33”.
Saw chain filing and file gauges
Bar
Chain
Length, inch
Pitch, inch
Gauge, inch
Max. nose radius
Type
Drive link count
16
3/8
0,058
11T
Husqvarna H42,
Husqvarna H48
60
18
3/8
0,058
68
20
3/8
0,058
72
24
3/8
0,058
84
28
3/8
0,058
92
16
3/8
0,050
Husqvarna H46,
Husqvarna H47,
Husqvarna H47S,
Husqvarna H82
60
18
3/8
0,050
68
20
3/8
0,050
72
24
3/8
0,050
84
28
3/8
0,050
93
32
3/8
0,050
105
!
WARNING! This chain saw is capable of
severe kickback that could result in
serious injury to the user. Do not operate
this chain saw unless you have
extraordinary cutting needs and
experience and specialized training for
dealing with kickback. Chain saws with
significantly reduced kickback potential
are available.