Hitachi VT-FX614A - Manual (Page 72)

COPYING FROM ONE VCR TO ANOTHER VCR (DUBBING) - 72 -
COPYING FROM ONE VCR TO ANOTHER VCR (DUBBING)
•
Hookup
If you have two VCRs, you may use one VCR to record a tape that is being played back in the other VCR.
VCR to VCR Hook-up Illustration (Rear Panel & VCR Front Panel Illustration)
•
To copy from one VCR to another VCR
1 Press the AVX button on the remote control of VCR-1 so that L1 (line) appears in the display.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 Press the REC, then PAUSE buttons on VCR-1. The VCR will go into Record/Pause.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3 Press the PLAY button on VCR-2. You will see the taped program being played on the TV.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 When you see the part of the program you wish to record, press the PAUSE button on VCR-1 again to
release pause and start recording.
• Press the STOP button to finish recording.