Hitachi VT-FX614A - Manual (Page 55)

INSTANT RECORDING TIMER - 55 -
INSTANT RECORDING TIMER
• Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you make a simplified timer recording without
having to use the programming timer. In order to set the IRT properly the clock must be set before starting.
1 Follow the steps 1 through 5 on "Basic recording steps" on pages 38 and 39.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 Press the REC/IRT button twice to indicate the recording time on the display.
• You may increase the recording time by 30 minutes each time you press the REC/IRT button.
• While you are recording, the remaining recording time is shown on the VCR display.
• At the end of your recording, the display will read "0:00", recording will stop automatically, and the VCR will turn
itself off.
Instant Recording Illustration.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To stop recording while in the IRT mode:
1 Press the POWER button.
2 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.