Hunter Fan 40170 - Manual (Page 23)

2
operation
1. Set the
Set Temperature slider
to the desired
temperature.
2. The
System Switch
determines the operating mode of
the thermostat. Select
Cool, Off,
or
Heat.
3. The
Fan Switch
should normally be located in the
Auto
position. To run the fan continuously, slide the
Fan Switch
to the
On
position.
note: in Auto , the fan will be turned on along with
normal operation of your system. in a normal gas or oil
furnace, the fan will be turned on by your furnace after
its warm-up delay.