HotBrick Dual WAN Firewall VPN 1400/2 User Manual

Page 22

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966

The screen is required in order to use multiple PPPoE sessions on the same WAN port. It

can also be used to manually connect or disconnect a PPPoE session.

Advanced WAN – PPPoE

Select WAN port & Session

WAN Port – Selected WAN port using the PPPoE connection

PPPoE Session – Usually the ISP provides multiple floating real IPs for PPPoE. Each WAN

port can have up to 8 PPPoE sessions with different IP addresses, if your WAN port is
using a PPPoE connection.

PPPoE Session MTU – The Maximum Transfer Unit for PPPoE packet data. Leave it

at the default, unless the ISP specifies a different PPPoE packet data size. The default
value of MTU is 1492 bytes.

WAN IP Account

User Name – Enter the PPPoE user name assigned by your ISP.
Password – Enter the PPPoE password assigned by your ISP.
Verify Password – Re-enter the PPPoE password assigned by your ISP.