beautypg.com

Refer to fig. 4-15 – Hustler Turf 60 User Manual

Page 24

background image

22

601457_1107

NOTES:

1. Initial oil change is after 5 hours of operation. Thereafter, change oil after

every 40 hours operation. Change more often under dusty or dirty condi-
tions and during hot weather periods.

2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer’s recommendations.

Refer to Engine Owner’s Manual for recommendations and other mainte-
nance items.

4. Service more often under dusty or dirty conditions.
5. Pump drive belt only - Inspect every 6 months or 100 hours and replace

if worn or cracking is noticed. Otherwise, replace every 200 hours or 2
years
whichever comes first.

6. Check fuel line hoses, fuel valve and grommets for any cracks or leaks
7. Initial system oil and filter change must be after the first 75 hours of use or

1 year whichever comes first. Thereafter, replace filter and oil in each
transaxle every 2 years or 200 hours, whichever comes first.

REFERENCES:

a — Refer to Engine Owner’s Manual

NOTE:

After completing maintenance cycle (300 hours), repeat cycle.

FasTrak Super Duty 48/54/60

Maintenance Schedule

Refer to Fig. 4-15

SERVICE AT

INTERVALS INDICATED

WEEKLY

OR 50

HOURS

MONTHLY

OR 100

HOURS

ANNUALLY

OR 300

HOURS

Verify safety start interlock system

Prior to each use

Visually inspect unit for loose
hardware and/or damaged parts

Prior to each use

Visually inspect tires

Prior to each use

Check oil level, engine (1)

Prior to each use or every 4 hours

Clean air intake screen (4)

Prior to each use or every 4 hours

Check fuel level

Prior to each use

Blades - sharpen & securely fastened

Prior to each use

Discharge chute - securely in place &
in lowest position

Prior to each use

Replace air cleaner paper element (5)

As needed

Clean engine and transaxle
compartment

Daily

Change transaxle oil and filter (7)

Every 200 hours or 2 years

Grease deck height pivots

X

Grease gauge wheel bearings

X

Change engine oil and filter (1) (3)

X

Clean cylinder and head fins(a)

X

Check battery connections

X

Check tire pressure with a gauge

X

Check hydraulic oil level

X

Clean engine exterior (a)

X

Clean & regap spark plugs (a)

X

Check pump and deck belt tension
and condition (5)

X

Check fuel and hydraulic lines (6)

X

Check fuel valve and grommet (6)

X

Tighten lug nuts on wheels (2)

X

Change fuel filter

X

Replace spark plugs

X

This manual is related to the following products: