HONDA GCV160 - Manual (Page 7)

7 ENGLISH
TYPE 8: AUTOMATIC CHOKE/FIXED THROTTLE
Starting the Engine
1. Turn the fuel valve to the ON
position.
2. Move the flywheel brake
lever to the RUN position.
3. Pull the starter grip lightly
until resistance is felt, then
pull briskly (see TYPE 1 Step
4 on page 4).
Stopping the Engine
1. Release the flywheel brake lever to activate the flywheel brake and
stop the engine.
2. Turn the fuel valve to the OFF position.
TYPE 9: AUTOMATIC CHOKE/REMOTE THROTTLE/
FLYWHEEL BRAKE
Starting the Engine
1. Turn the fuel valve to the
ON position.
2. Position the throttle control
so the throttle lever moves
to the FAST position (see
the equipment manual).
3. Position the flywheel
brake control so the
flywheel brake lever is in
the RUN position (see
the equipment manual).
4. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 4).
Throttle Setting
Position the throttle control for the desired engine speed. For best
engine performance, it is recommended the engine be operated with
the throttle in the FAST (or high) position.
Stopping The Engine
1. Move the throttle control to the
SLOW position.
2. Release the flywheel
brake lever to stop the
engine.
3. Turn the fuel valve to
the OFF position.
TYPE 10: AUTOMATIC CHOKE/REMOTE THROTTLE/
BLADE BRAKE CLUTCH (equipment control)
Starting the Engine
1. Turn the fuel valve to the ON position.
2. Position the throttle
control so the throttle
lever moves to the
FAST position (see the
equipment manual).
3. Make sure the blade
control lever is
disengaged (see
equipment manual).
4. Pull the starter grip
lightly until resistance is
felt, then pull briskly (see TYPE 1 Step 4 on page 4).
Throttle Setting
Position the throttle/stop control for the desired engine speed. For
best engine performance, it is recommended the engine be operated
with the throttle/stop lever in the FAST (or high) position.
Stopping the Engine
1. Disengage the blade brake clutch control lever (see equipment
manual).
2. Move the throttle/stop control to the SLOW position and allow the
engine to idle for a few seconds.
3. Move the throttle/stop lever to the STOP position.
4. Turn the fuel valve to the OFF position.
FUEL VALVE
ON
FLYWHEEL BRAKE CONTROL CABLE
SLOW
THROTTLE
LEVER
FAST
FUEL VALVE
ON
FLYWHEEL
BRAKE LEVER
SLOW
THROTTLE
LEVER
FAST
FLYWHEEL
BRAKE LEVER
SLOW
THROTTLE/
STOP
LEVER
FAST
STOP
FUEL VALVE
ON
POM31Z8B022.book Page 7 Monday, November 17, 2008 3:50 PM