gohastings.com POWERPOD 400 - Manual (Page 14)

Page 14 of 42
7.5. ANALOG SIGNAL FOLLOWERS
Analog signals from each channel’s transducers are available for reading or for sending to another power
supply for ratio (Master/Slave) operation. The signal can be sent to a channel on another power supply
and programmed as a Master for that power supply, allowing the remaining three channels to operate as
slaves. When operating 4 – 20 mA instruments, the followers supply a 0 -10 volt signal.
J5 1 Channel 1 Signal
2 Channel 1 Return
3 Channel 2 Signal
4 Channel 2 Return
5
6
7
8
9
10
11 Channel 3 Signal
12 Channel 3 Return
13 Channel 4 Signal
14 Channe l 4 Return
Analog
Out
(HD DB-15)
15