beautypg.com

Lights – HONDA 2009 Element User Manual

Page 271

background image

9. Put the inner fender cover in place.

Install the holding clip.
Lock the clip in place by pushing
on the center.
Install the wheel arch protector
and tighten the screws securely.

Replacing a Front Side Marker
Light Bulb

1. Open the hood.

To change the driver's side,
remove the front end of the air
intake duct by pulling it out (see
page 261).

2. Remove the socket from the light

assembly by turning it one-quarter
turn counterclockwise.

3. Pull the bulb straight out of its

socket. Push the new bulb straight
into the socket until it bottoms.

4. Reinstall the socket into the light

assembly by turning it clockwise
until it locks.

5. Test the lights to make sure the

new bulb is working.

6. Install the front end of the air

intake duct.

CONTINUED

Lights

265

Maintenance