Scan demo, Overview, To use the scan demo – Honeywell Dolphin Demos User Manual
Page 27: Scan statistics, Chapter 5 - scan demo, Overview -1 to use the scan demo -1, Scan statistics -1
5 - 1
5
Scan Demo
Overview
The Scan Demo decodes bar codes and provides a readout on the screen. In addition, the Scan Demo
provides scanning statistics for each bar code read.
To Use the Scan Demo
1.
Tap Start > Demos > Scan Demo. The Scan Demo window opens.
2.
Point the terminal at a bar code.
3.
Press and release the SCAN key. The Scan Demo decodes the bar code and a readout appears on
the screen.
Scan Statistics
If you want Scan Demo to track scan statistics or display them, tap Setup > View Statistics. All scan
statistics are reset to zero and will not appear on the screen after your next scan.
This is the bar
code readout.