Oice, Entering a destination, 2010 pilot – HONDA 2010 Pilot Navigation User Manual
Page 45

Navigation System
45
Entering a Destination
NOTE:
When finishing a “Today’s 
Destinations” trip, the Today’s 
Destinations list entries are stored to 
the Previous Destinations list, 
beginning with the date (e.g., item 1 
shown below). This entry contains all 
the destinations that were included in 
the Today’s Destinations itinerary. This 
allows you to reselect the entire Today’s 
Destinations content at a later date.
By Go Home
Selecting
Go Home
from the
MENU
screen (
Enter destination by
) takes
you home or to a frequently used 
address you have chosen.
If a
Go Home PIN
has been set, the
system prompts you to enter your PIN. 
Say or enter your PIN. The system will 
then display the 
Calculate route to
screen (see Driving to Your Destination 
on page
If a
Go Home PIN
has not been set, the
system displays the
Calculate route to
screen after you select
Go Home
(see
Driving to Your Destination on 
page
NOTE:
• To edit Home Address, see Home 
Address in System Setup on page
• Prior to departure, you can set areas
to avoid. The system then includes 
them in its calculations for the 
destination you have entered. See 
Edit Avoid Area on page
• PINs are optional. If you choose to
use a PIN, make sure you remember 
it. If you forget your PIN, your dealer 
will have to reset it for you.
• If a PIN is desired, enter it using the
Personal preference PIN number 
feature in SETUP. See page
information on entering your PIN 
number.
2010 Pilot
