Healthrider C515e HREL3006.0 - Manual (Page 5)

5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a phillips screwdriver , an adjustable
wrench , and a rubber mallet .
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the
quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the
parts bag, check to see if it has been pre-assembled.
M10 x 112mm Carriage Bolt (34)–4
M10 x 88mm Button Screw (63)–2
M4 x 16mm
Screw (66)–4
M10 Nylon
Locknut (29)–4
M8 Nylon
Locknut (46)–8
M10 Split
Washer (70)–2
Frame Spacer (83)–2
M4 x 22mm
Screw (93)–2
M8.5 Washer
(53)–12
Large Wave
Washer (20)–2
Wave Washer
(95)–2
M8 Split
Washer (58)–4
M10 x 52mm Bolt Set (27)–2
M8 x 25mm Patch
Screw (22)–4
M8 x 65mm Button
Bolt (89)–4
M8 x 45mm Button
Bolt (50)–4
M8 x 50mm Button
Bolt (82)–4