Messages 47, Messages 47 - 60, Setting the message centre number 47 – Panasonic GD87 User Manual
Page 44: Sms 47
Connecting to the Internet
To connect to the Internet, you need to type in AT command in
the terminal screen on your PC.
On the PC:
Ø
Display the terminal screen in the communication software
on your PC. (in our example: select Start > Programs >
Accessories > Communications > HyperTerminal)
On the GD87:
From Idle mode:
Ø
When Ready for Communication is displayed, type in the
AT command in the terminal screen on your PC.
Ø
Enter the phone number to connect to for Circuit Switch.
Use the dedicated phone number to packet for Packet
connection.
Ø
Enter AT commands as necessary.
Faxing
Ensure that you have fax application software installed on your
PC. We recommend you use one of the following packages:
Microsoft Fax (www.Microsoft.com)
WinFax Pro or ProComm Plus (www.symantec.com)
HotFax 3.0 (www.smithmicro.com)
Note: Ensure the fax application is set up to use the area code
and, for international calls, the country/region code.
46
Infrared
Infrared
Applications >
Infrared >
Dial-Up