Harbor Freight Tools 95029 - Manual (Page 4)

Page 4 SKU 95029 For technical questions, please call 1-800-444-3353
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.
To Attach a Quick Connector:
1.
It is recommended that prior to use, you attach a Quick Connector (not included) into
the Die Grinder’s Air Inlet (13). To do so, wrap approximately 3” of pipe thread sealer
tape (not included) around the male threads of a Quick Connector. Then firmly tighten
the Quick Connector into the Air Inlet. ( See Figure A.)
Assembly and Operating Instructions
20. Industrial applications must follow OSHA requirements.
Warning: Some dust created by power sanding, sawing, grinding, drilling and other
construction activities contain chemicals known (to the State of California) to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals
are: lead from lead-based paints, crystalline silica from bricks and cement or other
masonry products, arsenic and chromium from chemically treated lumber. Your risk
from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area and work with
approved safety equipment, such as those dust masks that are specifically designed
to filter out microscopic particles (California Health & Safety Code 25249.5, et seq.)
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
RECOMMENDED
COMPRESSED
AIR SYSTEM
Air Inlet (13)
Quick Connector (not included)
Air Hose (not included) Quick Connector to Oiler
(not included)
Quick Coupler
(not included)
Regulator
(not included)
Oiler (not included) Filter (not included)
Air Hose
(not included) Compressor
(not included)
Figure A