Hitachi VT-UX717A - Manual (Page 56)

Basic Operations (Tape Navigation)
56
TAPE DATA /
When you do not want to use the Tape Navigation feature, specify TAPE DATA in the
menu as follows. If a cassette is in the VCR, eject it before performing the following:
1. Press GUIDE, then press 5.
The "TAPE DATA MENU" will appear.
"TAPE DATA " is specified at the factory.
2. Press 1 to switch "1 TAPE DATA " to "".
Specifying disables the Tape Navigation feature. When "1 TAPE DATA " is
specified, the options "2 AUTO TITLE ", "3 DELETE TAPE NO. DATA", and "4
DISPLAY TAPE NO. DATA" are not displayed.
Each time you press 1, and alternate.
3. Press GUIDE after you are done with the set-up.
AUTO TITLE /
When you do not want to store program titles in memory, specify "AUTO TITLE " as
follows.
1. Press GUIDE, then press 5.
The "TAPE DATA MENU" will appear.
"AUTO TITLE " is specified at the factory.
2. Press 2 to switch "2 AUTO TITLE " to "".
After is specified, no program titles are stored in memory. Instead of a title, the
recording date, recording start time and channel will be stored.
Each time you press 2, and alternate.