Technical data – Husqvarna 128L User Manual
Page 19
English---19
545196741 Rev. 2 4/30/09
TECHNICAL DATA
Model 128L (M10 LH arbor shaft thread)
Approved accessories Type
Cutting attachment guard, part. no.
Trimmer head
T25
537 33 83--02
Plastic blades
Tricut 300 mm
531 00 38--11
Technical data
128C
128L
Engine
Cylinder volume, cm
3
28
28
Cylinder bore, mm
35
35
Stroke, mm
28,7
28,7
Idle speed, rpm
2,800--3,200
2,800--3,200
Recommended max. speed, rpm
10000
11000
Speed of output shaft, rpm
8000
8000
Max. engine output, acc. to ISO 8893, hp/kW
0,8
0,8
Catalytic converter muffler
Yes
Yes
Speed--regulated ignition system
Yes
Yes
Ignition system
Manufacturer/type of ignition system
Walbro/CD
Walbro/CD
Spark plug
Champion
Champion
RCJ--8Y
RCJ--8Y
Electrode gap, mm
0,6
0,6
Fuel and lubrication system
Manufacturer/type of carburetor
Zama
Zama
Fuel tank capacity, liter
0,4
0,4
Weight
Weight without fuel, cutting attachment and guard, kg
4,4
4,8
Noise emissions
(see note 1)
Sound power level, measured dB(A)
109
109
Sound power level, guaranteed L
WA
dB(A)
114
114
Noise levels
(see note 2)
Equivalent noise pressure level at the operators’ ear,
measured according to EN/ISO 11806 and ISO 22868,
dB(A)
100
100
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 22867,
FRONT HANDLE
Idling, m/s
2
3,9
3,9
Racing, m/s
2
5,6
5,6
REAR HANDLE
Idling, m/s
2
2,9
2,9
Racing, m/s
2
8,5
8,5
At idle, left/right handles:
3/5
3/5
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity
with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time--weighted energy total for
sound pressure levels under various working conditions with the following time distribution:
1/2 idling and 1/2 max speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all
the machine’s approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 128C (3/8 RH arbor shaft thread)
Approved accessories Type
Cutting attachment guard, part. no.
Trimmer head
T25
537 33 83--03