Harbor Freight Tools 94344 - Manual (Page 6)

SKU 94344 For technical questions, please call 1-800-444-3353 PAGE 6
2. Keep the Concrete Vibrator and surrounding areas clean at all times.
3. When spills of fuel or oil occur, they must be cleaned up immediately.
Dispose of fluids and cleaning materials as per any local, state, or federal codes
and regulations. Store oil rags in a covered metal container.
4. Never store fuel or other flammable materials near the Concrete Vibrator.
5. Do not smoke, or allow sparks, flames, or other sources of ignition around
the Concrete Vibrator.
6. Keep grounded conductive objects, such as tools, away from exposed, live
electrical parts and connections to avoid sparking or arcing. These events
could ignite fumes or vapors.
7. Do not refill the Fuel Tank while the Engine is running or while the Engine is
still hot. Do not operate the Concrete Vibrator with known leaks in the fuel
system.
8. Use only Engine manufacturer recommended fuel and oil.
MECHANICAL PRECAUTIONS
1. Prior to performing service, maintenance, or cleaning procedures, always
make sure the Gasoline Engine’s Power Switch is in its “OFF” position.
Allow the Engine to completely cool. Then, remove the spark plug from the
Engine.
2. Do not alter or adjust any part of the Concrete Vibrator or Engine that is
assembled and supplied by the manufacturer.
3. Always follow and complete scheduled Concrete Vibrator and Engine
maintenance.
CHEMICAL PRECAUTIONS
1. Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
2. Avoid body contact with fuels, oils, and lubricants used in the Concrete
Vibrator and Engine. If swallowed, seek medical treatment immediately. Do not
induce vomiting if fuel is swallowed. For skin contact, immediately wash with
soap and water. For eye contact, immediately flush eyes with clean water.