Humax IRHD-5000C - Manual (Page 47)

GB46
User’s Manual
In this chapter you can confi gure the installation setting and perform channel search. Menus such as
channels search, software update and default setting are included in this section.
Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
9.1 Channel Search
If your product is connected to the cable and TV, you can search channels manually by searching
parameters, if you know the MUX information.
1. Press the MENU button.
2. Select Installation using the / button and
press the OK button.
3. Select Channel Search using the / button and
press the OK button.
4. Select Frequency and enter the frequency using
the NUMERIC(0-9) buttons.
5. Select Network ID and enter the value using the
NUMERIC(0-9) buttons.
6. Select Symbol Rate and press the OK and /
button. Select the symbol rate and press the OK
button. If the required value is not available, select
User Defi ne and enter the symbol rate directly.
7. Select Search and press the OK button to start
channel search. Please wait for fi nishing the
channel search. If you want to stop the operation
during search, press the OK button.
8. Press the OK button to save the result.
9. Installation