Humax IRHD-5000C - Manual (Page 18)

2. Setup
GB17
User’s Manual
2.3 Using Component Cable
The component connection is recommended for Digital TV. Connect the product and the TV using a
component cable as follows.
1. Connect your CATV line to the CABLE IN.
2. Connect the product and the TV using a component cable.
You can either:
3. 1) Connect the product and the TV using an RCA cable (Audio L/R).
2) Connect the product and the Dolby Digital decoder using an S/PDIF cable.
Note: The Component Select switch should be on YPbPr when using the component cable.
Cable Outlet
RF Cable
S/PDIF AUDIO L R COMPONENT IN
RCA Cable COMPONENT Cable S/PDIF Cable