Husqvarna HUV4213 - Manual (Page 31)

Engine Oil
2005 HUV4213 Gasoline Vehicle Owner’s Manual Page 29
9. Place a floor jack under the rear receiver hitch where the hitch and body frame are fastened. Lift the vehi-
cle body slightly, allowing the front of the engine to tilt slightly downward. This will allow the oil filter more
clearance under the electrical component box (Figure 19).
10. Relocate the oil drain pan to a position under the engine oil filter (Figure 18).
11. Remove the engine oil filter, turning it counterclockwise, allowing the residual oil in the filter port and filter
to drain into the oil drain pan (Figure 20). See following NOTE.
Figure 18 Engine Oil Drain Plug and Pan
Figure 19 Compress Snubber Downward Figure 20 Remove Engine Oil Filter
OIL FILTER
DRAIN PAN
DRAIN PLUG
Compress
down.
SNUBBER
SNUBBER
BRACKET
USED OIL FILTER
OIL DRIP GUARD
DRAIN PAN