Husqvarna HUV4213 - Manual (Page 28)

Periodic Lubrication Schedule
Page 26 2005 HUV4213 Gasoline Vehicle Owner’s Manual
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
Semiannually by owner
or trained technician (or
every 50 hours of
operation, whichever
comes first)
Brake pedal shaft bearings Dry Moly Lube (P/N 603 00 00-01)
Accelerator push rod pivots,
mounts, and shifter cable pivots
Dry Moly Lube (P/N 603 00 00-01)
Front suspension (2 fittings) Chassis Lube (EP NLGI Grade 2)
Check/add brake fluid Use only DOT 5 (silicone) brake fluid
Annually by trained
technician only
(or every 100 hours of
operation, whichever
comes first)
Check/fill transaxle to plug level
MC012C-AS00 – 29 oz. (0.85 liters) 80-
90 Wt. API Class GL-3 or 80-90 Wt.
AGMA Class 5 EP gear lubricant
Inspect front wheel bearings
(Repack as necessary)
Chassis Lube (EP NLGI Grade 2)
First change 100 hours –
additional change
every 200 hours of
operation or annually,
whichever comes first.
Change engine oil and oil filter
32 oz. (0.95 liters) without filter; 38 oz.
(1.12 liters) with filter. See Oil Viscosity
on page 31.
Figure 15 HUV4213 Lubrication Points
1
2
3
4
5
6
7
2
5
1
7 4
2
2
3
6
3
6
2
2
1
FLOORBOARD