Activating (installing) optional features – HP AA-RTDRB-TE User Manual
Page 116
Operating and Managing Products and Parts
116
Embedded Web Server User Guide
Note:
When adding a firmware version, follow all procedural information contained in
the release notes that accompany the firmware version. That information supplements
and supersedes information provided in this manual.
Note:
Refer to the software release notes on whether the firmware upgrade can be
done without causing a disruption as some upgrades may cause a temporary
disruption to product function.
2. Type the drive path and name of the firmware file or click Browse to locate
the file.
3. When the correct filename is in the Download Firmware file from field,
click Send & Load Firmware. When the firmware has finished transferring,
a message displays stating that the new firmware is being activated on the
product and the product will be unavailable temporarily. You must reconnect
to EWS after this period by logging back into EWS.
Note:
You can verify the firmware was upgraded by viewing the Unit Properties tab
under the View page. See “
Activating (Installing) Optional Features
This procedure is described in “