beautypg.com

Tape care tips dubbing ---- from deck b to deck a, Recording ---- deck a only – HiFi Works 811-TK5M91-031 User Manual

Page 17

background image

- 16 -

1. Cassette tapes have two erase-protection

tabs - one for each side. To protect a record-
ing from being accidentally recorded over or
erased, use a screwdriver to remove one or
both of the cassette tape's erase-protection
tabs.

2. If you want to record on a tape side after you have

removed the erase protection
tab, place a piece of strong
plastic tape over that side's
erase-protection hole.

Notes:
1) Be sure you cover only the hole originally covered by

the erase-protection tab.

2) Removing the erase-protection tabs does not prevent

a bulk eraser from erasing a cassette tape.

Note

:

If a whistling noise is heard whilst recording from an AM station, move the AM loop antenna to a position where

noise is no longer heard from the unit.
If a whistle is heard (beat) it may be reduced by selecting Beat cut. The Beat cut function can be activated by pressing
the HIGH SPEED DUBBING button in AM tuner mode.

TAPE CARE TIPS

DUBBING ---- FROM DECK B TO DECK A

2. Insert a tape into the cassette

compartment.

3. Press the RECORD button

which also engages the PLAY
button.

RECORDING ---- DECK A ONLY

Preventing accidental erasure

Use only normal (type I) tapes for recording and playback.

To stop dubbing
Press the STOP/EJECT buttons of Deck A and Deck B.
Note : Do not change the dubbing speed when dubbing is in progress.

Use only normal (type I) tapes for recording.
RECORDING FROM THE BUILT-IN TUNER

1. Press the FUNCTION but-

ton to select TUNER and
tune into the required sta-
tion. (see page 10)

DECK A

DECK A

Side A Tab

Side B Tab

F U N C T I O N

F U N C T I O N

4. Press the RECORD button

which also engages the PLAY
button.

6. Press the PLAY button.

2. Insert the recorded tape into Deck

B and the blank tape into Deck A.

1. Press the FUNCTION button

to TAPE.

3. Press the PAUSE button.

5. Press the HIGH SPEED DUBBING

button to select the desired dubbing
speed:
NORMAL or
HIGH (display
TAPE 2X).

DECK A

DECK B

DECK A

DECK B

F U N C T I O N

F U N C T I O N

H I G H S P E E D D U B B I N G

DECK A