HP C4680 User Manual
Page 23
Solution
The HP All-in-One might not respond if you press the
On
button too quickly.
Press the
On
button once. It might take a few minutes for the HP All-in-One to turn on. If
you press the
On
button again during this time, you might turn the device off.
Warning
If the HP All-in-One still does not turn on, it might have a mechanical
failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to:
If prompted, choose your country/region, and then click
Contact HP
for information
on calling for technical support.
I connected the USB cable, but I am having problems using the HP All-in-One with my
computer
Cause
The USB cable was connected before the software was installed. Connecting the
USB cable before prompted can cause errors.
Solution
You must first install the software that came with the HP All-in-One before
connecting the USB cable. During installation, do not plug in the USB cable until prompted
by the onscreen instructions.
Once you have installed the software, connecting your computer to the HP All-in-One with a
USB cable is straightforward. Simply plug one end of the USB cable into the back of your
computer and the other into the back of the HP All-in-One. You can connect to any USB
port on the back of your computer.
For more information on installing the software and connecting the USB cable, see the
Setup Guide that came with the HP All-in-One.
The HP All-in-One does not print
Solution
If the HP All-in-One and computer are not communicating with each other, try
the following:
●
Look at the
On
light located on the front of the HP All-in-One. If it is not lit, the HP All-
in-One is turned off. Make sure the power cord is firmly connected to the HP All-in-One
and plugged into a power outlet. Press the
On
button to turn on the HP All-in-One.
●
Make sure the print cartridges are installed.
●
Make sure you have paper loaded in the input tray.
●
Check that the HP All-in-One does not have a paper jam.
●
Check that the print carriage is not jammed.
Chapter 2
20
HP Photosmart C3100 All-in-One series
Troubleshooting
and
support