Harbor Freight Tools Central Machinery 5 Speed Bench Drill Press with Work Light 60238 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. Item 60238
Table Support
1. Loosen the Pivot Lever (51).
2. Slide the Table Support (52) over the Column (8).
3. Tighten the Pivot Lever to secure
the Table Support in place.
Column (8)
Table
Support (52)
Pivot
Lever (51)
Figure B: Installing Table Support
Headstock and Feed Handles
1. Loosen the two Set Screws (9) on the
right side of the Headstock (42) so they
will stay clear while installing it.
2. With the help of an assistant, lift the Headstock
above the Column (8), and gently slide it
down the Column as far as it will go.
3. Tighten the two Set Screws to secure
the Headstock in place.
4. Thread the Feed Handles (6) into the
Feed Seat (7) and tighten them.
Feed
Handle (6)
Set
Screws
(9)
Headstock (42)
Feed
Seat (7)
Figure C: Installing Headstock and Feed Handles
SAFETY
OPERA
TION
MAINTENANCE
SETUP