Quickspecs – HP SL160Z User Manual
Page 5
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard (per server tray)
6 GB (3 x 2 GB) UDIMMs
Maximum (RDIMM) (per
server tray)
144 GB (18 x 8 GB) for Registered Memory configurations
Maximum (UDIMM) (per
server tray)
24 GB (12 x 2 GB) for Unbuffered Memory configurations
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see:
Network Controller
HP NC362i Integrated Dual Port Gigabit Server Adapter
Expansion Slots
Slot #
Technology Bus Width Connector
Width
*
Bus
Number
*
Device
No.
**
Form
Factor
Notes
1
PCI-
Express 2.0
x16
x16
1
0
Low Profile
3.3 volts
NOTE: All slots can accept universal keyed PCI cards.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
Storage Controller
Non-Hot Plug SATA
Models:
HP Embedded SATA RAID Controller (RAID 0, 1, 10)
NOTE: Transfer rate: 3.0 Gb/s SATA
NOTE: A HP Smart Array Controller is required for SAS HDD
NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced
Pack is needed to install storage controller drivers during a Windows operating system installation
from a CD.
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009
Page 5