Huffy M611804 - Manual (Page 11)

11 12/05 ID# M611804
Pole bracket (6) will need to be lightly pressed into
backboard ribbing. Be sure to press completely into
place. Attach rim (29) to backboard (31) and pole
bracket (6) with knob (25), reinforcement
bracket (24), and carriage bolt (21) as shown.
Tighten knob completely.
PRESS BRACKET
(6) INTO PLACE
HERE
SAWHORSE OR SUPPORT TABLE
21
25 6
7.
Carefully tip unit forward and slide
backboard assembly onto pole as shown.
KNOB MUST BE TIGHTENED
COMPLETELY AND
CHECKED FOR TIGHTNESS
BEFORE EACH USE.
BOARD STYLE
MAY VARY
WARNING!
NOTE:
SAWHORSE OR SUPPORT TABLE
29
31
IMPORTANT!
NOTE ORIENTATION
24