HP C5370A - Manual (Page 30)

3-8 Copying
To turn TE On/Off:
1 Press the Menu button until “TE” appears on the front panel
display.
2 Press the Plus ( + ) and Minus ( – ) buttons to switch between

(off) and
z
(on).
3 Press Select/Resume to confirm your selection.
ELC (Enhance Light Colors)
Use the Enhance Light Colors (ELC) setting to enhance light-color
backgrounds in documents, such as maps, photos, and invoices, so the
background is included on the copy. The ELC feature improves the
appearance of very pale colors. Turn on ELC if pale colors are copying
as white.
To change the ELC setting:
1 Press the Menu button repeatedly until ELC appears on the front
panel display.
2 Press the Plus ( + ) and Minus ( – ) buttons to switch between

(off) and
z
(on).
3 Press the Select/Resume button to confirm the change.
Changing Other Front Panel Settings
This section explains how to use the following settings and options:
‹ Front panel language
‹ Copy paper size
‹ Set defaults
‹ Factory defaults
‹ Clear/Stop
Front Panel Language
You established the Front Panel Language when you first set up your
HP Color Copier. To switch to a different language, follow these steps.
1 While holding down the Select/Resume button, press the Color
Intensity button, then release both buttons.
The current setting for default language is displayed.