haier 50FREE-1 - Manual (Page 8)

Install the water inlet hose
2. Connect the other ends to the water inlet valve .
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 1
Figure 2
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the
valves can result.
( As figure 2)
Push the d button ,then the
d is on,
d
The purpose is drying
laundrie at the same time can
dry the outer tub and the inner tub ,
which can avoid growing mildew
on the outer tub and the inner tub.
The max drying capacity of the fibre
laundrie is 1.5 kg.
"air- ry"
"air- ry"indicator light that
means the "air- ry"program is
chosen.
Reserve, remain time digitron
It displays "--" during detecting.
It displays remained reserve time (hour).
It displays total remained time (min).
It displays abnormal symbol in abnormal situation.
(See to Page15)
"Power" button
Push the "power" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "power" button to switch on the power. If
the "start/pause" button is not pushed, the machine
will switch off the power automatically after 5 minutes.
"Air- " Dry button
"Reserve" button
The digitron displays remain time
before washing is finished (in minutes)
Push "reserve" button, the digitron
displays the reserve time of washing
(in hours). The indicator flashes to
indicate that the reserve function
is operating.
Push "reserve" button to display
the reserve mode.
"Water level" button
"Program" button
Carpeting
Save
Wool
Standard Common washing
Following full-auto program is available
Program Application
Superfast Washing for light-soil a few laundries
Fibre
washing for light-soil saving laundriesl
washing for fibre laundries
For silk textiles slap-up laundries
usually under 2.5kg
washing for carpet or heavy thickness
and damnify large laundries--usually
under 3kg
Reserve Water
level
Progra
me
Air-Dry
Power
Air dry 45L
39L
32L
26L
18L
36L
42L
22L
29L
14L
Standard
Save
Superfast
Fibre
Wool
carpeting
The washing machine can detect the laundries
automatically in standard program.
After detection,it will set the water level to suitable value
among 4, 6, 8,and 10 automatically.
You can also set water level by yourself. After the
machine is started, it will not set water level automatically.
You shall push the start/pause button to make new
setting.
If there's water inside the tub, the machine cannot detect
the laundries and will display water level 32L .
If wet laundries are put in, it may display water level 45L .
You must set suitable water level by yourself.
If superfast program is selected, it will display water
level 22L . When water level 18L is reached in water
filling, it will perform washing while filling water.When
water level 22L is reached, it will change to normal
washing.
During operation of wash and rinse program, you can
push down the water level button to add water. When
you release the button, or it reaches the overflow water
level, the machine will stop adding water.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
Remark:
If you want to wash wool
silk or other top grade
laundries ,please select wool program
Lock