beautypg.com

How to change the direction of the drain hose, Using the drain hose, Push "power" button to switch on the power – haier 50FREE-1 User Manual

Page 7: Attention

background image

5

How to change the direction of the drain hose

b

2

4

7

3

6

Steps of using the operation buttons and

description of the steps

Start

Pause

Paus

e

Soak

Wash

Wash

Rinse

Rinse

Sterilize

Sterilize

Spin

Spin

Reserve

Water

level

Progr

am

Air-dry

Power

1.Push "power" button to switch on the power

Power

Program

2.Push "program" button to select suitable
full-auto program

After the power is switched on, "standard" is automatically set. To select other full-auto program, please push

the "program" button till the corresponding indicator is on. Refer to the "Program button" on Page 11.

E.g. Set to "Superfast" program for small quantity of laundries with light soil.

Air dry

45L

39L
32L
26L

18L

36L

42L

22L

29L

14L

Standard

Save

Superfast

Fibre

Wool

carpeting

20
15

Thrice
Twice
Once

Soak

Wash

Rinse

Spin

Sterilize

5

3 Push "soak", "wash", "rinse/sterilize", "spin" button to select suitable
procedure program

Attention

Even there's no water in the tub, a certain period is required before spin starting.
Separate the laundries that are not colorfast from other laundries in washing.
The pulsator will not rotate unless the water is filled to selected water level.

Soak

Soak

Wash

Wash

Rinse

Rinse

Sterilize

Sterilize

Spin

Spin

12

In selecting the

standard

program, the machine will execute fuzzy program to select water

and wash time according to the cloth and weight of the laundries. The full procedure is controlled
automatically.

The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position (Do not
put it on ground.)
Notes: The highest point of drain pipe shuold be
higher than the water level of washing tub for
avoiding to siphon phenomenon during drain.

2.

Do not step on or press the drain hose.

Using the drain hose

0.8m

1.Dismantle the back cover.

3.Protrude the drain hose from the hole on the right side
of the bottom,and fasten it onto the bottom with rack
and screw.

4.

Install the back cover.

2.

Put down the drain hose.Take off the drain

hose rack.Pull the drain hose into the cabinet
from the left side of the bottom.

Lock