beautypg.com

Controls & features – HONDA TRX420TE/FE User Manual

Page 35

background image

LEFT HANDLEBAR

(1) start button
(2) engine stop switch

(1)

(2)

START
OFF
RUN

27

Start Button

Engine Stop Switch

Controls & Features

Instruments & Controls

Starting Procedure,

If your ATV is stopped with the ignition switch ON (

) and the

engine stop switch OFF (

), the battery will discharge. Turn the

ignition switch OFF (

) to prevent battery discharge.

The start button ( ) is used for starting the engine. Pushing the button in
starts the engine. See

page

.

The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to either OFF (

) position. The switch

must be in the RUN (

) position to start the engine, and it should

normally remain in the RUN (

) position even when the engine is

OFF.

When the start button is pushed, the starter motor will crank the engine.
The starter motor will not operate if the engine stop switch is in the OFF
(

) position when the start button is pushed.

1

61

2

06/10/24 13:01:35 32HP4800_036