haier HDE03WNA - Manual (Page 6)

1. Remove all packaging material. This includes the foam base
and all adhesive tape holding the refrigerator accessories inside
and outside. Slide out and remove plastic or foam guard
used to secure the compressor from shipping damage due
to vibration and shock.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the refrigerator.
• Your refrigerator has two leveling legs which are located in the
front corners of your refrigerator. After properly placing your
refrigerator in its final position, you can level your refrigerator.
• Leveling legs can be adjusted by turning them clockwise to raise your
refrigerator or by turning them counterclockwise to lower
your refrigerator. The refrigerator door will close easier when the
leveling legs are raised.
• To assure your refrigerator works at the maximum efficiency it
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
• The following are recommended clearances around the refrigerator:
Sides……………3/4 "(19mm)
Top....................1" (25mm)
Back..................1" (25mm)
English
Installing Your Refrigerator
Unpacking Your Refrigerator
Leveling Your Refrigerator
Proper Air Circulation
5
HDE03WNA-MANUAL 10/22/01 12:17 PM Page 6