HONDA HARMONY FG100 - Manual (Page 35)

18. Secure the throttle cable and engine switch
wire harness to the upper handle and right
lower handle using the two tie straps as shown.
19. Tip the tiller on its carrying handle on a level
surface as shown.
20. Remove the oil filler cap/dipstick.
21. Slowly add the recommended oil (see page 20)
to the bottom edge of the oil fill hole. Do not
overfill, as the engine oil tank capacity is small.
Engine oil capacity: 0.11 US qt (3.4 fl oz, 0.1
l
)
NOTICE
Running the engine with too little or too much
oil can cause engine damage.
22. Screw in the oil filler cap/dipstick securely.
Before using the tiller, all operators of the tiller
must read the following sections:
• SAFETY (see page 4)
• CONTROLS (see page 7).
• BEFORE OPERATION (see page 10).
• OPERATION (see page 12).
TIE STRAPS
OIL FILLER
CAP/DIPSTICK
OIL FILL
HOLE
CARRYING
HANDLE
OIL
LEVEL
ASSEMBLY
FG100 TILLER
33