Hitachi DV-RX7000E - Manual (Page 45)

English - 45
English
Before presetting your DVD Recorder:
• Switch on both the television and your DVD Recorder
• Check that the date and time are correct
Up to 12 programs can be preset.
Enter a S
HOW
V
IEW
button. Press the 34
and OK or 1 buttons to select
S
HOW V IEW .
• A message is displayed to allow you to enter the
S HOW V IEW code.
• If all 12 programs have been set, the message
‘Timer is full’ is displayed. Refer to page 44 if you
wish to cancel a preset recording.
Press the numeric buttons to enter the
code of the program that you wish to
record in your television magazine.
If you wish to correct the ShowView code that you
are entering:
• Press the 2 button until the digit to be corrected
is cleared.
• Enter the correct digit.
2
1
Press the 21 buttons to select Yes, and
then press the OK button.
• The selected entry will be deleted from the list.
Press the MENU button after finishing
the operation. The menu screen will
disappear. 7
6
RETURN OK EXIT
Program DVD-RAM(VR)
Enter S HOW V IEW number. [0~9] Code
RETURN OK MOVE EXIT
Program DVD-RAM(VR)
S HOW V IEW
Standard Timer
S HOW V IEW E Extended : Off
Using the S
HOW
V
IEW
Feature