Hitachi DV-RX7000E - Manual (Page 30)

30 - English
Setting Up SCART Jack
Options
If you connect external device (VCR/satellite
receiver/cable box) or TV to DVD Recoder with SCART
Jack (21pin), you need to set this option.
With the unit in stop mode, press the
MENU button on the remote.
Select “Setup” using 34 buttons, then
press the 1 or OK button.
Using the 34 buttons, move the
selection bar to “System” then press 1
or OK to select.
Using the 34 buttons, move the
selection bar to “AV1 Output” then press
1
or OK to select.
Using the 34 and OK buttons, select
“Video” or “RGB” to suit the AV terminal
of TV.
• AV2 input option will be set automatically according
to the signal of external device (VCR/satellite
receiver/cable box).
5
4
3
2
1
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN OK MOVE EXIT
System DVD-RAM(VR)
Clock Set
Install
CM Skip Time : 15 Sec
AV 1 Output : Video
NICAM :
If you set the player menu, disc menu, audio and
subtitle language in advance, they will come up
automatically every time you watch a movie.
If the selected language is not recorded on the disc,
the original pre-recorded language is selected.
With the unit in stop mode, press the
MENU button on the remote control.
Select Setup using the 34 buttons,
then press the 1 or OK button.
You can't use the Setup functions during disc
playback.
Select Language using the 34 buttons,
then press the 1 or OK button.
Language setup menu will be displayed.
3
2
1
Setting Up the
Language Features
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN OK MOVE EXIT
Language DVD-RAM(VR)
Audio : Original
Subtitle : Automatic
Disc Menu : English
On-Screen Menu : English