Harbor Freight Tools 92174 - Manual (Page 8)

Page 8 SKU 92174 For technical questions, please call 1-800-444-3353.
through the center link in the Safety Chain, and through the Tow Bar. Firmly tighten
a Lock Nut (8) onto the Bolt (8) to secure the Safety Chain to the Tow Bar. Insert
another Bolt (8) through the side/rear mounting holes of the Hitch Coupler and Tow
Bar and secure with a Lock Nut (8).
(see Figures A and B.)
With assistance, turn the Frame and Tow Bar assembly upside down.
AXLE (A6)
TRAILER
sPRInG (A8)
u-BOLT (3)
sPRInG
HAnGER
nuT (7)
BOLT (7)
sPRInG PLATE
(3)
nuT
(7)
BOLT (7)
LOCK nuT And
WAsHER (3)
TRAILER
FRAME
(A1)
FIGuRE C
COTTER
PIn (7)
COTTER
PIn (7)
Place the two Trailer Springs (A8) in the spring hangers located on the underside of
the Trailer Frame (A1). Secure each Trailer Spring to the Trailer Frame, using two
Bolts (7), two Nuts (7), and two Cotter Pins (7).
(see Figure C.)
Place the Axle (A6) on top of the Trailer Springs (A8). Position a Spring Plate (3)
under each Trailer Spring. Place two U-Bolts (3) over each end of the Axle and
through each Spring Plate. Then secure the Axle to the Spring assembly, using four
Lock Nuts (3) and Spring Washers (3) for each end of the Axle.
(see Figure C.)
5.
6.
7.
REV 06b, 07e