Harman-Kardon MS 150 - Manual (Page 5)

5
MS 150
Rear-Panel Connections
DC IN
24V 4.9A
5V 1A
122.6W
ANALOG
IN
OPTICAL
AUX IN
LFE/
SUBWOOFER
VIDEO OUT
S-VIDEO
ANTENNA
i-TUNES
FM75Ω
DC Power Input
ANALOG/OPTICAL
DIGITAL AUXILIARY
AUDIO INPUT AUXILIARY ANALOG
AUDIO INPUT SUBWOOFER
OUTPUT S-VIDEO
OUTPUT VIDEO
OUTPUT USB OUTPUT
(iTUNES
ONLY) FM ANTENNA
TERMINAL
DC Power Input: After making all other connections, plug in the power supply. Plug
the included region-specific power cord into the included power supply and into an
unswitched wall outlet.
Analog/Optical-Digital Auxiliary Audio Input 1: Connect either the stereo mini plug
cable or the optical-digital audio cable (both cables included) here, and connect the
other end of the cable to a source device such as a portable CD player. Connect the stereo
mini plug cable only to the player’s line-level analog audio output or headphone jack,
and connect the optical cable only to an optical-digital audio output. Select the Analog
1 or Digital Audio source.
Auxiliary Analog Audio Input 3: Connect one end of a stereo RCA-type interconnect
cable (not included) here, and connect the other end to the analog-audio outputs on a
source device such as a tape deck.
Subwoofer Output: Connect this full-range output to a powered subwoofer (not includ-
ed) equipped with a low-pass filter for improved low-frequency (bass) reproduction, or
connect it to an external amplifier or powered speakers.
Composite and S-Video Outputs: Connect either of these outputs to a TV or video
display for viewing videos or photos stored on a compatible iPod/iPhone that supports
video browsing. No other displays are available through these outputs.
FM Antenna Terminal: Connect the included FM antenna wire here.
DC Power Input
Analog/Optical-
Digital
AUX Line-In 1
AUX Line-In 3 Subwoofer
Output
S-Video
Output
Composite
Video Output
FM Antenna
Terminal