Ms 150, Technical specifications, Specifications – Harman-Kardon MS 150 User Manual
Page 11

11
MS 150
Technical Specifications
Specifications
System
Power output
30 watts per channel, 20hz – 20khz, ThD
<0.07% into 6 ohms, both channels driven
bandwidth
57hz – 27khz, –6db
System frequency response
65hz – 20khz, ±3db
Signal-to-noise ratio (“A” WTG)
75db
Channel separation
≥60db
Crosstalk between sources
≥60db
Line-level input sensitivity at 1khz
1.0V RMS, ±1db
Video Outputs
Composite video
1.0V (pk-pk), 75 ohms, negative sync
S-Video
(y) 1.0V (pk-pk), 75 ohms, negative
sync
(C) 0.286V (pk-pk), 75 ohms
General
Power requirement
DC 24V, 4.9A; 5V, 1A; power supply
works with AC 230V/50hz
Power consumption
<1W standby, 123W maximum
(both channels driven)
Operating temperature
0°C to 35°C (32°F to 95°F)
Dimensions (h x W x D)
252mm x 488mm x 194mm
(9-5/16" x 19-1/4" x 7-5/8")
Weight
8.2kg (18.08 lb)
Loudspeakers
Low-frequency transducers
Two 125mm (4-15/16") felted-paper
drivers, ported
high-frequency transducers
Two 19mm (3/4") titanium-laminate domes
Nominal impedance
6 ohms
Sensitivity (2.83V/1m)
87db
Frequency response
80hz – 20khz (±3db)
FM Tuner Section
Frequency range
87.5 – 108.0Mhz
Usable sensitivity
IhF 1.3μV/13.2dbf
Signal-to-noise ratio
Mono/stereo 70/65db
Distortion
Mono/stereo 0.15/0.3%
Stereo separation
35db @ 1khz, 100% deviation @ 65dbf
Selectivity
±300khz: 65db
Image rejection
80db
IF rejection
90db
Tuner output level
1khz, ±50khz, Dev 500mV
Number of presets
Six
RDS capability
PTy (program type), PS (program service),
Text (radio text)
CD Section
Disc compatibility
CD, CD-R, CD-RW, enhanced CD,
MP3, WMA
ThD+N (20hz – 20khz)
<0.01%
Frequency response
0dbr ±0.5
Channel separation
≥65db
Signal-to-noise ratio (“A” WTG)
>100dbr
22khz filter >100dbr
Weight
9kg (19.8 lb)
Features, specifications and appearance are subject to change without notice.
Please register your product at www.harmankardon.com. you’ll need your product’s
serial number.