C. location, D. setup, C. location d. setup – Hoshizaki STACKABLE CRESCENT CUBER KM-2100SWH3 User Manual
Page 10

10
C. Location
CAUTION
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within 45°F to 100°F (7°C to 38°C); Normal operating 
water temperature should be within 45°F to 90°F (7°C to 32°C). Operation 
of the icemaker, for extended periods, outside of these normal temperature 
ranges may affect icemaker performance.
2. This icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to 
go	below	32°F	(0°C).	See	"III.C.	Preparing	the	Icemaker	for	Long	Storage."
For best operating results:
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
•	The	location	should	provide	a	firm	and	level	foundation	for	the	equipment.
•	Allow	6"	(15	cm)	clearance	at	rear,	sides,	and	top	for	proper	air	circulation	and	ease	of	
maintenance and/or service should they be required.
D. Setup
CAUTION
Before operating the icemaker, the bin control thermostat assembly must be 
installed correctly. Failure to properly install the assembly could result in ice 
backup and unit damage.
1) Unpack the storage bin, and attach the 4 adjustable legs provided (bin accessory) to
the bottom of the storage bin.
2) Position the storage bin in the selected permanent location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin using the 2 mounting brackets and the bolts 
provided. See Fig. 2.
Fig. 2
Icemaker
Mounting Brackets
Bolts
Bin
