haier PRO XS3 309292L - Manual (Page 46)

Technical Data
46 309292L
Technical Data
Loctite
®
is a registered trademark of the Loctite Corporation.
Category Data
Maximum Working Fluid Pressure 100 psi (0.7 MPa, 7 bar)
Maximum Working Air Pressure 100 psi (0.7 MPa, 7 bar)
Minimum Air Pressure at Gun Inlet 40 psi (0.28 MPa, 2.8 bar)
Maximum Fluid Operating Temperature 120
°
F (48
°
C)
Paint Resistivity Range 3 megohm/cm to infinity
Short Circuit Current Output 125 microamperes
Voltage Output PRO Xs3 (244400, 244575): 60 kV
PRO Xs3 (244579, 244576): 30-60 kV
PRO Xs4 (244401): 85 kV
PRO Xs4 (244580): 40-85 kV
Sound Power (measured per ISO Standard 9216) at 40 psi (0.28 MPa, 2.8 bar): 90.4 dB(A)
at 100 psi (0.7 MPa, 7 bar): 105.4 dB(A)
Sound Pressure (measured 1 m from gun) at 40 psi (0.28 MPa, 2.8 bar): 87 dB(A)
at 100 psi (0.7 MPa, 7 bar): 99 dB(A)
Air inlet fitting, left-hand thread 1/4 npsm(m)
Fluid inlet fitting 3/8 npsm(m)
Gun Weight PRO Xs3: 25.1 oz (712 g)
PRO Xs4: 27.8 oz (788 g)
Gun Length PRO Xs3: 9.7 in. (24.6 cm)
PRO Xs4: 11.1 in. (28.2 cm)
Wetted Parts Stainless Steel; Nylon, Acetal, Ultra-High Molecular
Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten
Wire, Polyethylene