Hoover 56511A46 - Manual (Page 10)

1. VaCuuM asseMblY
5
A. Handle section
B. Cleaner body
C. Hose, cleaning tools and wands
D. Handle bolts and nuts packet
Remove all parts from carton and identify
each item shown.
Make sure all parts are located before dis-
posing of packing materials.
1.2 Remove bag door on cleaner body by
pushing down at top of door and pulling door outward.
Switch (A) above bag door should be in OFF position.
1.3 Slide handle onto cleaner body.
1.4 Push bolts into holes on back of handle.
1.5 Place nuts in recessed areas on front of handle. Hold
each nut in place while tightening each bolt securely with
a Phillips screwdriver.
1.6 Reposition bag door by fitting tabs on bottom of door
into opening. Press top of door to snap securely shut.
1.7 Position cord on back of cleaner as shown and press
cord into clip.
attaCh handle
Carton Contents
1.1
A
B C
D
1.3
1.4 1.5
1.6 1.7
1.2