Husqvarna 225R EN - Manual (Page 31)

English –
31
TECHNICAL DATA
Technical data
Engine
Cylinder capacity, cu. in/cm 3
Cylinder bore, inch/mm
Stroke length, inch/mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893.
kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Noise levels
Equivalent noise pressure level at the user’s
ear, measured according to EN 11806 and
ISO 7917, dB(A), min/max:
Equivalent noise power level at the user’s
ear, measured according to EN 11806 and
ISO 10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to EN 11806 and ISO 7916,
m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.
The table indicates the highest and lowest values.
232R/RD
1,88/30,8
1,38/35
1,26/32
2 700
11 000-11 700
10 000
1,1/ 8 400
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,02/0,5
Walbro WT
1,06/0,5
14,3/6,5 (R)
14,8/6,7(RD)
90/100
104/110
2,5/2,5
3,0/3,5
2,0/2,0
5,1/4,9
235R
2,21/36,3
1,50/38
1,26/32
2 700
11 000-11 700
10 000
1,3/ 9 000
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,02/0,5
Walbro WT
1,06/0,5
16,1/7,3
92/101
105/112
2,2/2,7
2,7/4,3
3,5/5,0
4,5/6,2