Hotpoint BE72 - Manual (Page 12)

12
Using Your Hob
The temperature indicators will blink if:
- An object (eg. saucepan/lid) is placed on the cooking zone for more
than 10 seconds.
- Any boiled over liquids or food are spilled onto the control zone.
- Any extended pressure is placed on the control zone.
These could cause the word ‘DEF’ to appear on the display, accompanied by a
beep. The temperature indicators will blink and the cooking zone(s) in use will
turn off.
To stop the beep, remove the cause of the malfunction.
To stop the temperature indicators blinking, press the key for 3 seconds
and the control zone(s) can be used again.
Blinking temperature indicators
If the user inadvertently forgets to turn off one or more cooking zones, the
corresponding control is automatically put out of order after a given amount
of time.
Safety cut out
Power Level Maximum
Operation Time
1 - 2 6 hours
3 - 4 - 5 5 hours
6 - 7 - 8 4 hours
9 - 10 - 11 3 hours
12 - 13 - 14 1.5 hours