Hotpoint BE72 - Manual (Page 10)

Using Your Hob
10
Use
Connect the cooking hob to the mains electricity supply
by touching inside the area marked . The ‘Power On’
indicator light, to the right of the key, will light up.
To enable the control panel, press and hold for 3
seconds. The Lock indicator light, to the left of the key, will
light up.
The cooking zones can now be used.
NOTE: If no keys are pressed for 2 minutes (no cooking
zones or timers in operation) the Lock indicator light will
go out - The hob is locked and will turn off automatically
afer 4 minutes.
Operation
Activate the plate you wish to use by pressing the key.
The power setting is directly proportional to the amount
of times the key is pressed and is displayed on the
temperature indicator (15 stages).
Cooking-plate selection
The appliance is controlled by simply touching the
different keys marked on the ceramic surface.