Harbor Freight Tools CEN-TECH 92801 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 92801
Save This Manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual near
the assembly diagram (or month and year of purchase
if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert symbol, is used
to address practices not related to personal injury.
General Safety Warnings
WARNING! Read all safety warnings
and instructions. Save all warnings and
instructions for future reference.
1. Avoid direct eye exposure to laser light.
Do not direct the laser beam into the eyes of
any person or animal. Doing so may cause
severe eye injury or permanent blindness.
2. Verify Laser Level is in the “Off” position before
making any adjustments or changing the batteries.
3. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
4. Remove batteries if Laser Level is not to
be used for a long period of time.
5. The Laser Level is a delicate instrument;
do not drop or jar the Laser Level.
6. If installing on a wall surface without the Tripod (3),
verify that installation surface has no hidden
utility lines before drilling or driving screws.
7. Keep work area clean and well lit.
8. This product is not a toy.
Keep it out of reach of children.
9. Keep children and bystanders away
while operating Laser Level.
10. Inspect before every use;
do not use if parts are loose or damaged.
11. Stay alert, watch what you are doing and use
common sense when operating Laser Level.
Do not use Laser Level while you are tired or under
the influence of drugs, alcohol or medication.
12. Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts.
13. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
14. WARNING: The brass components of this
product contain lead, a chemical known
to the State of California to cause birth
defects (or other reproductive harm).
(California Health & Safety code § 25249.5, et seq.)
15. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.