Hitachi VM-3700A - Manual (Page 53)

RECORDING TV PROGRAMS
53
RECORDING TV PROGRAMS
If your TV or VCR has video/audio out jacks, you can record the TV program with
camera/recorder.
1. Connect the video/audio cord to "AUDIO OUT" and "VIDEO OUT" of your TV or
VCR.
2. Connect the other end to "AUDIO" and "VIDEO" of camera/recorder.
3. Insert the cassette.
NOTE: Power source must be connected to the camera/recorder.
4. Set "AV OUT/IN" switch to "IN" position.
5. Press and hold the small button on "POWER" switch, and then slide it to "CAM"
position. The "POWER" indicator will light.
6. Turn on your TV or VCR and tune it to the channel you wish to record.
7. Press "REC/PAUSE" button to start recording. You are now recording the TV
program.
8. Press "REC/PAUSE" button to stop recording.
9. After recording, place "POWER" switch in "OFF" and then press "STOP/EJECT"
button to remove the cassette.