HP Photo Printer - Manual (Page 11)

11
2 Press the Save/Print button on the dock. The
HP Image Transfer software will launch on your computer. If
you have set the software to automatically transfer the
images from the camera, the images will automatically
transfer to the computer. Otherwise, in the Transfer Images
from Camera/Card screen, click Start Transfer . The images
are transferred to the computer, and then if there are any
still images that were previously selected for HP Instant
Share destinations, those actions are started.
3 When the Image Action Summary screen appears on the
computer, your images have been saved and shared. You
can leave the camera in the dock to recharge the camera
batteries (if the batteries are rechargeable).
Printing Images Using the Dock
1 Confirm the following:
• The dock insert is attached to the top of the dock. (See
step 1 on page 6.)
• The HP AC power adapter is plugged into the dock, and
the power cord for the power adapter is plugged into an
electrical outlet. (See step 4 on page 7.)
• The USB cable is connected between the dock and your
printer. (See step 4 on page 7.)
• The camera is inserted into the dock. (See step 5 on
page 8.)
• The printer is turned on, and paper is loaded in the
printer. Refer to your printer user’s manual for printer
setup information.
• If you are using a PictBridge printer, the camera’s USB
Configuration is set to Digital Camera in the Setup menu.
(See your camera User’s Manual.)