haier 0010557172 - Manual (Page 16)

15
Before going to bed , you can simply press the
SLEEP button and unit will operation in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
3 hours after SLEEP mode starts, temperature
will become 1
o
C higher than temperature setting.
After another 3 hours temperature rises by 1
o
C
further. The unit will run for further 2 hours then
stops. Temperature is higher than temperature
setting so that room temperature won't be too
low for your sleep.
2. In HEAT mode
3 hours after SLEEP mode starts, temperature
will become 1
o
C lower than temperature setting.
After another 3 hours temperature decrease by
1
o
C further. The unit will run for further 2 hours
then stops. Temperature is lower than
temperature setting so that room temperature
won't be too high for your sleep.
3. In AUTO mode
The unit operates in corresponding sleep
SLEEP mode adapted to the automatically
selected operation mode.
4. In FAN mode
It has timing off function.
5. The sleep time can be adjusted within
the range of 1-8 hours.
Push the SLEEP button. The remote
controller will display " ", and display the
timing off and detail off time in the timing
off setting area.
Push the time adjusting button to adjust the
detail sleep time.
6. If the sleep time in cooling, dehumidifying
and heating run is less than 8 hours
Within the set sleep time, the conditioner will
run as per the procedure described in 1 and
2. It will be switched off automatically when
the sleep time is expired.
In COOL,DRY mode
Unit stop Temperature setting
SLEEP operation starts SLEEP operation stops
Approx. 2 hrs
3 hr
3 hr
Rises 1
o
C
Rises 1
o
C
Unit stop Temperature setting
SLEEP
operation starts
SLEEP
operation stops
3 hr
Decreases 1
o
C
3 hr
Decreases 1
o
C
In HEAT mode
Approx. 2 hrs
Remote controller
Operation
SLEEP Operation